➝ Shipping to United Kingdom and Ireland.
GBP, £ 
FOX v.1.4.1.7
➝ Shipping to United Kingdom and Ireland.
Voller Zinc Phosphate Primer Is A High Quality, High Build Base Coat. Providing Excellent Bonding Characteristics this is the ideal undercoat for our Voller Machinery Enamel Range.
The quick drying rust inhibiting formula provides easy priming for many kinds of top coats.
Ideal for use on steelwork, plant, machinery and railings.
Voller Quick Dry Zinc Phosphate Primer is a versatile, quick-drying, single pack anti-corrosive primer for steel. With excellent anti-corrosive properties on properly prepared steel, it is suitable for use under a wide variety of conventional finishes, combining excellent adhesion and ease of application. Our Quick Dry Zinc Phosphate Primer is recommended for use as an anti-corrosive primer for ferrous metals and all suitably prepared non-ferrous substrates, and it makes an ideal primer for overcoating with Johnstone’s Semi-Gloss Steel & Cladding Topcoat.
Key Features
| Use on: | prepared metal surfaces |
| Use where: | Internal & external |
| Typical applications: | Plant & Equipment, Machinery, Trailers & Structural Steel |
| Approximate coverage: | 60-75 sqft per litre |
| Overcoating time: | 4 – 8 hrs. |
| Curing time: | Full Cure – 100hrs |
Voller Zinc Phosphate Primer Is A High Quality, High Build Base Coat. Providing Excellent Bonding Characteristics this is the ideal undercoat for our Voller Machinery Enamel Range.
The quick drying rust inhibiting formula provides easy priming for many kinds of top coats.
Ideal for use on steelwork, plant, machinery and railings.
Voller Quick Dry Zinc Phosphate Primer is a versatile, quick-drying, single pack anti-corrosive primer for steel. With excellent anti-corrosive properties on properly prepared steel, it is suitable for use under a wide variety of conventional finishes, combining excellent adhesion and ease of application. Our Quick Dry Zinc Phosphate Primer is recommended for use as an anti-corrosive primer for ferrous metals and all suitably prepared non-ferrous substrates, and it makes an ideal primer for overcoating with Johnstone’s Semi-Gloss Steel & Cladding Topcoat.
Key Features
| Use on: | prepared metal surfaces |
| Use where: | Internal & external |
| Typical applications: | Plant & Equipment, Machinery, Trailers & Structural Steel |
| Approximate coverage: | 60-75 sqft per litre |
| Overcoating time: | 4 – 8 hrs. |
| Curing time: | Full Cure – 100hrs |
Typical Use Case;
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates.
Bare steel should be free from dust, rust and scale.
Blast cleaning to SA 2½ is recommended.
If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree.
Any oil or grease should be removed with solvent before de-rusting.
Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts welds, etc.
Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.
| Use on: | prepared metal surfaces |
| Use where: | Internal & external |
| Typical applications: | Plant & Equipment, Machinery, Trailers & Structural Steel |
| Approximate coverage: | 60-75 sqft per litre |
| Overcoating time: | 4 - 8 hrs. |
| Curing time: | Full Cure – 100hrs |
+44 7481 251662
specialistcoatingsireland@gmail.com
